A
- ABS polymer. Mixed-mode fracture Characterization of mixed-mode fracture toughness of viscoelastic ABS polymeric material by using modified Arcan set-up [Volume 3, Issue 2, 2016, Pages 131-138]
- Al-Brass Study of interface of Al-brass composite fabricated by centrifugal casting [Volume 3, Issue 4, 2016, Pages 369-376]
- Al-Mn-Al2O3-In-Situ composite Production and characterization of in-situ Al-Mn-Al2O3 composite produced in Al-MnO2 system [Volume 3, Issue 3, 2016, Pages 277-284]
- Al-MnO2 system Production and characterization of in-situ Al-Mn-Al2O3 composite produced in Al-MnO2 system [Volume 3, Issue 3, 2016, Pages 277-284]
- Aluminothermic reaction Production and characterization of in-situ Al-Mn-Al2O3 composite produced in Al-MnO2 system [Volume 3, Issue 3, 2016, Pages 277-284]
- Aluminum Interface characterization of Al/cast iron composite [Volume 3, Issue 3, 2016, Pages 261-268]
- Aluminum-brass composite Defects characterization of Al-brass composite produced via centrifugal process [Volume 3, Issue 2, 2016, Pages 123-130]
- Aluminum-Copper Composite Interface characterization of aluminum-copper bimetal composite produced via centrifugal casting [Volume 3, Issue 4, 2016, Pages 343-350]
- Analytical Model Analytical prediction of mode I strain energy release rate at crack growth initiation of polymeric nanocomposites [Volume 3, Issue 1, 2016, Pages 1-10]
- Anhydride hardener Mechanical properties of carbon fibers/epoxy composite containing anhydride self-healing material under transverse loading [Volume 3, Issue 3, 2016, Pages 285-290]
- ANSYS software Electromechanical response analysis of a rotating piezoelectric cylinder with functionally graded material under thermomagnetic fields [Volume 3, Issue 1, 2016, Pages 59-72]
B
- Bending behavior Mechanical properties of carbon fibers/epoxy composite containing anhydride self-healing material under transverse loading [Volume 3, Issue 3, 2016, Pages 285-290]
- Brass/Graphite composite Investigations on microstructure, wear behavior and corrosion resistance of brass/graphite composite produced by friction stir processing [Volume 3, Issue 3, 2016, Pages 253-260]
- Buckling Experimental and numerical study of the buckling of semi-cylindrical composite lattice [Volume 3, Issue 3, 2016, Pages 269-276]
C
- CaCO3 nanoparticle Experimental studies on morphology and impact behavior of PA6/ABS/CaCO3 nanocomposites [Volume 3, Issue 1, 2016, Pages 43-50]
- Carbon nanotubes Analytical prediction of mode I strain energy release rate at crack growth initiation of polymeric nanocomposites [Volume 3, Issue 1, 2016, Pages 1-10]
- Cast Iron Interface characterization of Al/cast iron composite [Volume 3, Issue 3, 2016, Pages 261-268]
- Ceramic matrix composite Modified hot pressing method for fabrication of ceramic matrix composites [Volume 3, Issue 2, 2016, Pages 139-146]
- Cohesive zone Micromechanical study of fibre- matrix debonding and matrix cracking using cohesive zone model and extended finite element method [Volume 3, Issue 1, 2016, Pages 21-30]
- Composite Experimental and numerical analysis of impact on curved steel- polyurea bi-layer panels [Volume 3, Issue 3, 2016, Pages 207-214]
- Composite Simple finite element modeling of planar composite structures using digital image processing technique in Matlab [Volume 3, Issue 2, 2016, Pages 195-202]
- Composite Simulation of thermo-mechanical behavior of glass-epoxy composites containing shape memory alloy under static loading [Volume 3, Issue 2, 2016, Pages 111-122]
- Composite Experimental and numerical study of the buckling of semi-cylindrical composite lattice [Volume 3, Issue 3, 2016, Pages 269-276]
- Composite Experimental study of behavior of filament winding composite pipes with liner using glass fibers and silica nanoparticles under impact loading [Volume 3, Issue 4, 2016, Pages 311-320]
- Composite Study of interface of Al-brass composite fabricated by centrifugal casting [Volume 3, Issue 4, 2016, Pages 369-376]
- Composite beam Frequency analysis of SMA composite beam resting on Pasternak elastic foundation using four engineering beam theories [Volume 3, Issue 1, 2016, Pages 73-84]
- Composite cylinder The effects of fiber angle and temperature on the distribution of long-term stress and creep strain for unidirectional multilayer composite cylinder [Volume 3, Issue 3, 2016, Pages 233-242]
- Composite laminates Modeling damage evolution of composite laminates under low velocity off-center impact [Volume 3, Issue 3, 2016, Pages 243-252]
- Composite patch Mixed mode fatigue crack growth analysis of cracked aluminium panel repaired with composite patches using extended finite element method [Volume 3, Issue 4, 2016, Pages 321-332]
- Composite sandwich panel Three-point bending test of metal and composite sandwich panels with grid stiffened core [Volume 3, Issue 4, 2016, Pages 377-388]
- Constitutive model Dynamic constitutive-micromechanical model to predict dynamic shear behavior of glass/epoxy composites [Volume 3, Issue 3, 2016, Pages 291-300]
- Continuum damage mechanics Fatigue life prediction of laminated composites under multiaxial fatigue loading condition by using developed continuum damage mechanics model [Volume 3, Issue 3, 2016, Pages 215-224]
- Corrosion Investigations on microstructure, wear behavior and corrosion resistance of brass/graphite composite produced by friction stir processing [Volume 3, Issue 3, 2016, Pages 253-260]
- Creep modeling Modeling creep in long fiber reinforced laminated composites using micromechanical rules [Volume 3, Issue 4, 2016, Pages 409-418]
- Curing temperature The effect of curing temperature on fracture energy of nanosilica filled epoxy with different particle sizes [Volume 3, Issue 4, 2016, Pages 389-396]
D
- Delamination Theoretical and experimental investigations of delamination effects on modal characteristics of symmetric cross-ply composite beams [Volume 3, Issue 2, 2016, Pages 177-186]
- Drop impact test Effect of nano clay addition to energy absorption capacity of steel-polyurea bi-layer [Volume 3, Issue 2, 2016, Pages 157-164]
- Drop impact test Experimental and numerical analysis of impact on curved steel- polyurea bi-layer panels [Volume 3, Issue 3, 2016, Pages 207-214]
- Dropped weight equipment Modeling damage evolution of composite laminates under low velocity off-center impact [Volume 3, Issue 3, 2016, Pages 243-252]
- Drucker-Prager Criterion Experimental, analytical and numerical investigation of polypropylene nanocomposites microhardness [Volume 3, Issue 2, 2016, Pages 165-176]
- Dynamic response Frequency dependent damped vibration of composite sandwich beam with viscoelastic and transverse flexible core based on GHM method [Volume 3, Issue 4, 2016, Pages 397-408]
E
- EIS The structure and corrosion properties of polyester-clay nanocomposite coatings and effect of curing on coatings properties [Volume 3, Issue 1, 2016, Pages 51-58]
- Elastic foundation Frequency analysis of SMA composite beam resting on Pasternak elastic foundation using four engineering beam theories [Volume 3, Issue 1, 2016, Pages 73-84]
- Electromechanical Electromechanical response analysis of a rotating piezoelectric cylinder with functionally graded material under thermomagnetic fields [Volume 3, Issue 1, 2016, Pages 59-72]
- Electrostatic The structure and corrosion properties of polyester-clay nanocomposite coatings and effect of curing on coatings properties [Volume 3, Issue 1, 2016, Pages 51-58]
- Epoxy-carbon fibers composite Mechanical properties of carbon fibers/epoxy composite containing anhydride self-healing material under transverse loading [Volume 3, Issue 3, 2016, Pages 285-290]
- Epoxy resin Study of the influence of temperature and nanosilica on curing behavior and cure kinetics modelling of an epoxy resin system [Volume 3, Issue 4, 2016, Pages 351-358]
- Expansion hot press Modified hot pressing method for fabrication of ceramic matrix composites [Volume 3, Issue 2, 2016, Pages 139-146]
- Extended Finite Element Method Micromechanical study of fibre- matrix debonding and matrix cracking using cohesive zone model and extended finite element method [Volume 3, Issue 1, 2016, Pages 21-30]
- Extended Finite Element Method Mixed mode fatigue crack growth analysis of cracked aluminium panel repaired with composite patches using extended finite element method [Volume 3, Issue 4, 2016, Pages 321-332]
F
- Fiber-matrix debonding Micromechanical fracture modeling of unidirectional composite material under transverse loading [Volume 3, Issue 1, 2016, Pages 93-106]
- Fiber Orientation The effects of fiber angle and temperature on the distribution of long-term stress and creep strain for unidirectional multilayer composite cylinder [Volume 3, Issue 3, 2016, Pages 233-242]
- Finite element Simple finite element modeling of planar composite structures using digital image processing technique in Matlab [Volume 3, Issue 2, 2016, Pages 195-202]
- Finite Element Method (FEM) Theoretical and experimental investigations of delamination effects on modal characteristics of symmetric cross-ply composite beams [Volume 3, Issue 2, 2016, Pages 177-186]
- Flexible core Frequency dependent damped vibration of composite sandwich beam with viscoelastic and transverse flexible core based on GHM method [Volume 3, Issue 4, 2016, Pages 397-408]
- Fracture strength Micromechanical fracture modeling of unidirectional composite material under transverse loading [Volume 3, Issue 1, 2016, Pages 93-106]
- Fracture toughness The effect of curing temperature on fracture energy of nanosilica filled epoxy with different particle sizes [Volume 3, Issue 4, 2016, Pages 389-396]
- Frequency analysis Frequency analysis of SMA composite beam resting on Pasternak elastic foundation using four engineering beam theories [Volume 3, Issue 1, 2016, Pages 73-84]
- Friction stir processing Investigations on microstructure, wear behavior and corrosion resistance of brass/graphite composite produced by friction stir processing [Volume 3, Issue 3, 2016, Pages 253-260]
- Functionally graded material Electromechanical response analysis of a rotating piezoelectric cylinder with functionally graded material under thermomagnetic fields [Volume 3, Issue 1, 2016, Pages 59-72]
- Fuzzy Controller Vibration suppression of MR sandwich beams based on fuzzy logic [Volume 3, Issue 4, 2016, Pages 359-368]
G
- GHM method Frequency dependent damped vibration of composite sandwich beam with viscoelastic and transverse flexible core based on GHM method [Volume 3, Issue 4, 2016, Pages 397-408]
- Graphite Interface characterization of Al/cast iron composite [Volume 3, Issue 3, 2016, Pages 261-268]
- Graphite particle Investigations on microstructure, wear behavior and corrosion resistance of brass/graphite composite produced by friction stir processing [Volume 3, Issue 3, 2016, Pages 253-260]
- Grid composite plate Experimental and numerical investigation of the effect of longitudinal and horizontal ribs on flexural behavior of grid stiffened composite plates [Volume 3, Issue 4, 2016, Pages 333-342]
H
- Hollow Cylinder Exact solution of steady nonlinear heat conduction in exponentially graded cylindrical and spherical shells with temperature-dependent properties [Volume 3, Issue 3, 2016, Pages 301-306]
- Hot press Modified hot pressing method for fabrication of ceramic matrix composites [Volume 3, Issue 2, 2016, Pages 139-146]
I
- Impact Experimental study of behavior of filament winding composite pipes with liner using glass fibers and silica nanoparticles under impact loading [Volume 3, Issue 4, 2016, Pages 311-320]
- Impact acceleration Experimental and numerical analysis of impact on curved steel- polyurea bi-layer panels [Volume 3, Issue 3, 2016, Pages 207-214]
- Impregnation model Composite Modeling of Impregnation in the Pultrusion of Thermoplastic Composites [Volume 3, Issue 1, 2016, Pages 31-42]
- Intermetallic Compound Interface characterization of Al/cast iron composite [Volume 3, Issue 3, 2016, Pages 261-268]
- Intermetallic Compound Interface characterization of aluminum-copper bimetal composite produced via centrifugal casting [Volume 3, Issue 4, 2016, Pages 343-350]
- Isogrid composite An experimental investigation into the effect of surface-modified silica nanoparticles on the mechanical behavior of E-glass/epoxy grid composite panels under transverse loading [Volume 3, Issue 1, 2016, Pages 11-20]
L
- Laminated Composite Beam Theoretical and experimental investigations of delamination effects on modal characteristics of symmetric cross-ply composite beams [Volume 3, Issue 2, 2016, Pages 177-186]
- Laminated composites Fatigue life prediction of laminated composites under multiaxial fatigue loading condition by using developed continuum damage mechanics model [Volume 3, Issue 3, 2016, Pages 215-224]
- Life prediction Fatigue life prediction of laminated composites under multiaxial fatigue loading condition by using developed continuum damage mechanics model [Volume 3, Issue 3, 2016, Pages 215-224]
- Loading quasi-static Three-point bending test of metal and composite sandwich panels with grid stiffened core [Volume 3, Issue 4, 2016, Pages 377-388]
- Long fiber laminated composites Modeling creep in long fiber reinforced laminated composites using micromechanical rules [Volume 3, Issue 4, 2016, Pages 409-418]
- Long-term creep The effects of fiber angle and temperature on the distribution of long-term stress and creep strain for unidirectional multilayer composite cylinder [Volume 3, Issue 3, 2016, Pages 233-242]
- Low velocity impact Modeling damage evolution of composite laminates under low velocity off-center impact [Volume 3, Issue 3, 2016, Pages 243-252]
M
- Macromechnic Model Experimental, analytical and numerical investigation of polypropylene nanocomposites microhardness [Volume 3, Issue 2, 2016, Pages 165-176]
- Magnetorheological layer Vibration suppression of MR sandwich beams based on fuzzy logic [Volume 3, Issue 4, 2016, Pages 359-368]
- Matrix Cracking Micromechanical study of fibre- matrix debonding and matrix cracking using cohesive zone model and extended finite element method [Volume 3, Issue 1, 2016, Pages 21-30]
- Matrix Cracking Micromechanical fracture modeling of unidirectional composite material under transverse loading [Volume 3, Issue 1, 2016, Pages 93-106]
- Mechanical properties Production and characterization of in-situ Al-Mn-Al2O3 composite produced in Al-MnO2 system [Volume 3, Issue 3, 2016, Pages 277-284]
- Mechanical properties Improvement in the mechanical properties of polyester nanocomposite with nano-silica prepared by sol-gel method [Volume 3, Issue 4, 2016, Pages 419-428]
- Mg-Al composite Effect of solid ring preheating and cooling conditions on bonding of Mg-Al composite produced by centrifugal casting [Volume 3, Issue 1, 2016, Pages 85-92]
- Micromechanic Model Experimental, analytical and numerical investigation of polypropylene nanocomposites microhardness [Volume 3, Issue 2, 2016, Pages 165-176]
- Micromechanics Micromechanical study of fibre- matrix debonding and matrix cracking using cohesive zone model and extended finite element method [Volume 3, Issue 1, 2016, Pages 21-30]
- Micromechanics Micromechanical fracture modeling of unidirectional composite material under transverse loading [Volume 3, Issue 1, 2016, Pages 93-106]
- Micromechanics Dynamic constitutive-micromechanical model to predict dynamic shear behavior of glass/epoxy composites [Volume 3, Issue 3, 2016, Pages 291-300]
- Micromechanics Modeling creep in long fiber reinforced laminated composites using micromechanical rules [Volume 3, Issue 4, 2016, Pages 409-418]
- Mode I Analytical prediction of mode I strain energy release rate at crack growth initiation of polymeric nanocomposites [Volume 3, Issue 1, 2016, Pages 1-10]
- Modeling Simple finite element modeling of planar composite structures using digital image processing technique in Matlab [Volume 3, Issue 2, 2016, Pages 195-202]
- Modified arcan device Characterization of mixed-mode fracture toughness of viscoelastic ABS polymeric material by using modified Arcan set-up [Volume 3, Issue 2, 2016, Pages 131-138]
- Morphology Experimental studies on morphology and impact behavior of PA6/ABS/CaCO3 nanocomposites [Volume 3, Issue 1, 2016, Pages 43-50]
N
- Nano-CaCO3 Experimental studies on the durability of PA6-PP-CaCO3 nanocomposite gears [Volume 3, Issue 2, 2016, Pages 147-156]
- Nano clay Effect of nano clay addition to energy absorption capacity of steel-polyurea bi-layer [Volume 3, Issue 2, 2016, Pages 157-164]
- Nanoclay The structure and corrosion properties of polyester-clay nanocomposite coatings and effect of curing on coatings properties [Volume 3, Issue 1, 2016, Pages 51-58]
- Nanocomposite Experimental studies on the durability of PA6-PP-CaCO3 nanocomposite gears [Volume 3, Issue 2, 2016, Pages 147-156]
- Nanocomposite Improvement in the mechanical properties of polyester nanocomposite with nano-silica prepared by sol-gel method [Volume 3, Issue 4, 2016, Pages 419-428]
- Nanocomposite coatings The structure and corrosion properties of polyester-clay nanocomposite coatings and effect of curing on coatings properties [Volume 3, Issue 1, 2016, Pages 51-58]
- Nanocomposites Analytical prediction of mode I strain energy release rate at crack growth initiation of polymeric nanocomposites [Volume 3, Issue 1, 2016, Pages 1-10]
- Nanosilica Study of the influence of temperature and nanosilica on curing behavior and cure kinetics modelling of an epoxy resin system [Volume 3, Issue 4, 2016, Pages 351-358]
- Nano-silica particles The effect of curing temperature on fracture energy of nanosilica filled epoxy with different particle sizes [Volume 3, Issue 4, 2016, Pages 389-396]
- Nonlinear heat conduction Exact solution of steady nonlinear heat conduction in exponentially graded cylindrical and spherical shells with temperature-dependent properties [Volume 3, Issue 3, 2016, Pages 301-306]
P
- PA6/ABS Experimental studies on morphology and impact behavior of PA6/ABS/CaCO3 nanocomposites [Volume 3, Issue 1, 2016, Pages 43-50]
- Plastic deformation Experimental and numerical analysis of impact on curved steel- polyurea bi-layer panels [Volume 3, Issue 3, 2016, Pages 207-214]
- Polyamide 6 Experimental studies on the durability of PA6-PP-CaCO3 nanocomposite gears [Volume 3, Issue 2, 2016, Pages 147-156]
- Polymeric material Dynamic constitutive-micromechanical model to predict dynamic shear behavior of glass/epoxy composites [Volume 3, Issue 3, 2016, Pages 291-300]
- Polymer matrix composites؛ Basalt fibers؛ Multi-walled carbon nanotubes؛Surface modification An experimental study on mechanical properties of epoxy/basalt/carbon nanotube composites under tensile and flexural loadings [Volume 3, Issue 2, 2016, Pages 187-194]
- Polypropylene Experimental studies on the durability of PA6-PP-CaCO3 nanocomposite gears [Volume 3, Issue 2, 2016, Pages 147-156]
- Polypropylene Nanocomposites Experimental, analytical and numerical investigation of polypropylene nanocomposites microhardness [Volume 3, Issue 2, 2016, Pages 165-176]
- Polyurea Effect of nano clay addition to energy absorption capacity of steel-polyurea bi-layer [Volume 3, Issue 2, 2016, Pages 157-164]
- Polyurea Experimental and numerical analysis of impact on curved steel- polyurea bi-layer panels [Volume 3, Issue 3, 2016, Pages 207-214]
- Powder metal Modified hot pressing method for fabrication of ceramic matrix composites [Volume 3, Issue 2, 2016, Pages 139-146]
- Pre-strain Simulation of thermo-mechanical behavior of glass-epoxy composites containing shape memory alloy under static loading [Volume 3, Issue 2, 2016, Pages 111-122]
- Pultrusion Modeling of Impregnation in the Pultrusion of Thermoplastic Composites [Volume 3, Issue 1, 2016, Pages 31-42]
R
- Representative volume element Micromechanical study of fibre- matrix debonding and matrix cracking using cohesive zone model and extended finite element method [Volume 3, Issue 1, 2016, Pages 21-30]
- Rib Experimental and numerical study of the buckling of semi-cylindrical composite lattice [Volume 3, Issue 3, 2016, Pages 269-276]
- Rotating piezoelectric cylinder Electromechanical response analysis of a rotating piezoelectric cylinder with functionally graded material under thermomagnetic fields [Volume 3, Issue 1, 2016, Pages 59-72]
S
- Sandwich beam Vibration suppression of MR sandwich beams based on fuzzy logic [Volume 3, Issue 4, 2016, Pages 359-368]
- Sandwich beam Frequency dependent damped vibration of composite sandwich beam with viscoelastic and transverse flexible core based on GHM method [Volume 3, Issue 4, 2016, Pages 397-408]
- Schapery integral model The effects of fiber angle and temperature on the distribution of long-term stress and creep strain for unidirectional multilayer composite cylinder [Volume 3, Issue 3, 2016, Pages 233-242]
- Self-healing phenomenon Mechanical properties of carbon fibers/epoxy composite containing anhydride self-healing material under transverse loading [Volume 3, Issue 3, 2016, Pages 285-290]
- Semi-cylindrical Lattice Experimental and numerical study of the buckling of semi-cylindrical composite lattice [Volume 3, Issue 3, 2016, Pages 269-276]
- Shape memory alloy Simulation of thermo-mechanical behavior of glass-epoxy composites containing shape memory alloy under static loading [Volume 3, Issue 2, 2016, Pages 111-122]
- Shape memory alloy wires Frequency analysis of SMA composite beam resting on Pasternak elastic foundation using four engineering beam theories [Volume 3, Issue 1, 2016, Pages 73-84]
- Shear properties Dynamic constitutive-micromechanical model to predict dynamic shear behavior of glass/epoxy composites [Volume 3, Issue 3, 2016, Pages 291-300]
- Silica nano particles Experimental study of behavior of filament winding composite pipes with liner using glass fibers and silica nanoparticles under impact loading [Volume 3, Issue 4, 2016, Pages 311-320]
- Sol-gel Improvement in the mechanical properties of polyester nanocomposite with nano-silica prepared by sol-gel method [Volume 3, Issue 4, 2016, Pages 419-428]
- Stiffness degradation Fatigue life prediction of laminated composites under multiaxial fatigue loading condition by using developed continuum damage mechanics model [Volume 3, Issue 3, 2016, Pages 215-224]
- Stir casting Production and characterization of in-situ Al-Mn-Al2O3 composite produced in Al-MnO2 system [Volume 3, Issue 3, 2016, Pages 277-284]
- Strain energy release rate Analytical prediction of mode I strain energy release rate at crack growth initiation of polymeric nanocomposites [Volume 3, Issue 1, 2016, Pages 1-10]
- Strain Rate Dynamic constitutive-micromechanical model to predict dynamic shear behavior of glass/epoxy composites [Volume 3, Issue 3, 2016, Pages 291-300]
- Strength-weight Three-point bending test of metal and composite sandwich panels with grid stiffened core [Volume 3, Issue 4, 2016, Pages 377-388]
- Surface modified silica An experimental investigation into the effect of surface-modified silica nanoparticles on the mechanical behavior of E-glass/epoxy grid composite panels under transverse loading [Volume 3, Issue 1, 2016, Pages 11-20]
T
- Tensile and flexural tests An experimental study on mechanical properties of epoxy/basalt/carbon nanotube composites under tensile and flexural loadings [Volume 3, Issue 2, 2016, Pages 187-194]
- Tensile modulus The effect of curing temperature on fracture energy of nanosilica filled epoxy with different particle sizes [Volume 3, Issue 4, 2016, Pages 389-396]
- Thermomagnetic fields Electromechanical response analysis of a rotating piezoelectric cylinder with functionally graded material under thermomagnetic fields [Volume 3, Issue 1, 2016, Pages 59-72]
- Thermoplastic Modeling of Impregnation in the Pultrusion of Thermoplastic Composites [Volume 3, Issue 1, 2016, Pages 31-42]
- Three-point bending Experimental and numerical investigation of the effect of longitudinal and horizontal ribs on flexural behavior of grid stiffened composite plates [Volume 3, Issue 4, 2016, Pages 333-342]
- Three-point bending Three-point bending test of metal and composite sandwich panels with grid stiffened core [Volume 3, Issue 4, 2016, Pages 377-388]
- Transverse loading An experimental investigation into the effect of surface-modified silica nanoparticles on the mechanical behavior of E-glass/epoxy grid composite panels under transverse loading [Volume 3, Issue 1, 2016, Pages 11-20]
- Tube Experimental study of behavior of filament winding composite pipes with liner using glass fibers and silica nanoparticles under impact loading [Volume 3, Issue 4, 2016, Pages 311-320]
U
- Unwanted vibrations Vibration suppression of MR sandwich beams based on fuzzy logic [Volume 3, Issue 4, 2016, Pages 359-368]
V
- Vibration Analysis Theoretical and experimental investigations of delamination effects on modal characteristics of symmetric cross-ply composite beams [Volume 3, Issue 2, 2016, Pages 177-186]
- Vickers microhardness Experimental, analytical and numerical investigation of polypropylene nanocomposites microhardness [Volume 3, Issue 2, 2016, Pages 165-176]
- Viscoelastic behavior Characterization of mixed-mode fracture toughness of viscoelastic ABS polymeric material by using modified Arcan set-up [Volume 3, Issue 2, 2016, Pages 131-138]
- Viscoelastic behavior Modeling creep in long fiber reinforced laminated composites using micromechanical rules [Volume 3, Issue 4, 2016, Pages 409-418]
- Viscoelastic material Frequency dependent damped vibration of composite sandwich beam with viscoelastic and transverse flexible core based on GHM method [Volume 3, Issue 4, 2016, Pages 397-408]
W
- Weak interface bonding Simulation of thermo-mechanical behavior of glass-epoxy composites containing shape memory alloy under static loading [Volume 3, Issue 2, 2016, Pages 111-122]
- Wear Investigations on microstructure, wear behavior and corrosion resistance of brass/graphite composite produced by friction stir processing [Volume 3, Issue 3, 2016, Pages 253-260]